Precision edges are one part of the result
Rectified tile has edges mechanically finished to achieve more precise face dimensions. TCNA's discussion of narrow grout joints makes a further distinction: rectification addresses size variation, while substrate conditions, installation, and tile shape still influence the finished result.
A request for rectified tile should therefore lead to a layout and preparation discussion. It should not be translated into a promise of an invisible joint or a perfectly seamless surface.
Ask the supplier to identify the edge treatment on the exact product and size. If the design depends on a restrained grid, establish that intent early enough for the team to evaluate the whole assembly.
Choose the joint as part of the design
Bring grout samples into the material review. Consider whether the joint should blend with the tile or outline each piece. A contrast that looks subtle on a small board can become a strong pattern across an open room.
Ask the installer to propose a joint width supported by the selected tile, its manufacturer guidance, and the installation conditions. Avoid specifying the width by comparing it to a coin or credit card. Record the actual agreed detail in the proposal.
For several adjoining rooms, consider where the grid should start and which sightlines deserve priority. A carefully planned joint layout can be more valuable to the design than pursuing the smallest imaginable space between tiles.
Review flatness, pattern, and light together
Discuss how the substrate will be assessed and prepared. Ask what is included in the estimate and which conditions cannot be confirmed until the existing finish is removed. The preparation conversation should happen before installation begins.
Review the proposed offset or pattern with the installer. Ask how the actual tile's shape affects that arrangement and whether a mockup would help establish expectations. Do not assume a photograph of another product proves that the same pattern will work with yours.
Identify strong light sources such as large windows or low wall lighting. Use the planned lighting during sample or mockup review where practical. The aim is to make visual expectations explicit while the design can still be adjusted.
Keep movement details visible in the plan
Ask the project team to show where movement accommodation is required and how it relates to the grout grid and perimeter details. Ordinary grout joints and movement joints have different purposes, so one should not be silently substituted for the other.
Before approval, review the tile, grout, pattern, transitions, and movement details as one arrangement. Keep the selected product codes and mockup approval with the project records.
For a complete residential or commercial floor, the refined appearance comes from coordination. Rectified edges can support the desired visual order, while the documented installation details make that order practical to build and maintain.
Sources and further reading